If you are looking for a washing machine then it’s common to see different and new features and modes in the washing machine.

Modes like tumble wash vs pulsator wash or impeller wash and agitator wash.

These modes can confuse you while buying a washing machine.

If you just purchased a new washing machine and don’t know too much about these modes then don’t worry.

Tumble wash mode is used in front-load washing machines in which the chamber rotates horizontally to tumble the clothes during the wash cycle.

While Pulsator wash is used in the top load washing machine where the chamber rotates vertically to remove the dirt and stains from the clothes.

In this article, we will deep dive into tumble wash and pulsator wash, the pros and cons of each washing mode, and the difference between Tumble wash vs Pulsator Wash vs impeller wash vs agitator.

Let’s get started.

Table Of Contents

What is Tumble Wash in Washing Machine?

Tumble Wash mode is used in the front load washing machine where the washing chamber or drum is positioned horizontally so it can rotate horizontally.

In this mode, when the spinning motor rotates the wash basket also rotates with it which causes the clothes to tumble continuously in the drum.

If you google tumble word, then you can find phrases like rolling and bouncing without injury.

And in the washing machine, tumble means clothes rotate horizontally and wash with detergent and water.

So when the tumble wash cycle starts after the soaking cycle and detergent solution the clothes start to tumble.

And tumbling of clothes removes the dirt and stains from the clothes but this cycle takes time and is slower than other cycles.

One best things about tumble wash are it consumes very less water.

Watch this video to see the difference between a normal wash cycle and a tumble wash cycle.

First, there is normal spinning then tumble wash starts.

video

Pros and Cons of Tumble Wash

Pros

  • Tumble Wash Requires Less Water and less detergent
  • Tumble Wash Can be Gentle on Clothes.
  • Clothes are less tangled and come out less wrinkled.
  • Effective Stain Remover
  • Low Noise Operation
  • Low Power Consumption
  • Tumble Wash is gentler than Pulsator or Impeller Wash.

Cons

  • The cycle can take a long time to complete
  • Can be Harsh on Delicate Clothes

Also Read: What is Cradle Wash in IFB Washing Machine? 

What is Pulsator or Impeller Wash?

Like tumble wash mode is used in the front load washing machines, the pulsator or impeller wash mode is used in the top load washing machines.

This mode has a wash chamber positioned vertically and drums rotate in the vertical direction.

The pulsator or impeller is attached to the bottom of the chamber of the washing machine.

This impeller or pulsator rotates vertically to create a strong water current that rubs the clothes against each other to remove stains and dirt.

This mode is considered a more powerful and strong mode to remove stains and dirt from clothes.

But however, this mode can be rough for delicate clothes and damage the fabric of its cloth.

Read This: What is Wash, Rinse, and Spin Cycle in a Washing Machine?

Pros and cons of Pulsator or Impeller Wash?

Pros

  • Removes dirt and stains effectively
  • Even wash clothes perfectly
  • Pulsator mode is faster than tumble wash mode
  • Easy loading and unloading
  • Gentle on soft clothes

Cons

  • Requires more water than tumble wash mode
  • Clothes can get tangled

Main Difference Between Tumble Wash vs Pulsator Wash or Impeller Wash

The main difference between tumble and pulsator or impeller wash is the spinning mechanism.

Because in tumble wash, the drum is positioned in a horizontal position and rotates the drum at horizontal way,

But in Pulsator or impeller wash, the drum is positioned in a vertical position and rotates on the vertical axis.

But tumble mode requires less water, detergent, and energy than impeller or pulsator wash.

Difference Between Pulsator vs agitator vs impeller vs tumble

The Impeller and Pulsator are the same with different names, in this mode drums are positioned vertically and rotate at the vertical axis. 

The tumble mode has the drum placed in a horizontal position and rotates the drum on a horizontal axis.

But the Agitotor mode is also found in Top load washing machines just like Impeller or Pulsator,

Agitator in washing machines are tall spindles, finned and in the center of the wash basket, that twist back and forth.

Watch this video for understanding the difference between Agitator Vs Impeller or Pulsator Mode.

Final Words

All washing machine brands keep coming up with modern and advanced technologies with time in order to make their customer happy.

And tumble wash and pulsator wash are examples of this new modern technology.

So what is tumble wash and what’s the difference between tumble wash and pulsator wash?

These questions can arise in your mind, so you need to understand these modes in order to find a new washing machine or use a washing machine.

If you have any questions regarding tumble wash vs pulsator wash vs impeller wash vs agitator wash then you can ask them in the comment section of this article.